Pro-Ject 6 PerspeX Balanced Turntable Superpack/Pick It MC 3 Cartridge

Turntable  

• The transparent acrylic plinth stands on three individually height-adjustable Sorbothane®-damped aluminium cones and carries the motor and the sub-chassis.
• The sub-chassis, made of Corian, rests on tree magnetic fields. A supplied spirit level allows easy adjustment of the sub-chassis.  
• A quiet running DC motor with a two-step pulley drives the platter's outside edge via a belt.  
• The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.  
• The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter weighing 2Kg and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.  
• Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided. 
• External power supply avoids potential electro-mechanical interference.  

Tonearm 9cc Evolution  

• The headshell and armtube are fashioned from a single piece of carbon-fibre.  
• Conical armtube avoids standing wave reflections.  
• Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.  
• Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.  
• Sorbothane®-damped counterweight effectively counteracts unwanted resonances. 
• The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g  
• Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.  
• Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).  
• Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.  
• Silicone-damped armlift can be adjusted to suit working height of the arm.  
• The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.  
• High quality connection cable Pro-Ject Connect it Phono RCA-C supplied (123cm)  
• Dust cover included  
  

Specifications:

• Nominal speeds: 33 / 45 r.p.m.
• Dust cover: yes
• Magnet supported sub-chassis: yes
• Record clamp: yes
• RCA phono sockets: yes
• Sorbothane-damped aluminium cones: yes
• Tonearm: Pro-Ject 9cc Evolution
• Carbon-fibre headshell and armtube: yes
• Effective tonearm length: 9 " (230mm)
• Effective tonearm mass : 8g
• Overhang: 18mm
• Supplied counterweights cartridge weights: 5 - 7.5g, 7 - 10g, 9 - 11g and 10 - 14g
• Downforce range: 10 - 35mN
• Speed variance: ±0,5 %
• Wow and flutter: ±0,06 %
• Signal to noise: -73dB
• Platter weight/diameter: 2kg/300mm
• Power supply type: Mains-fed outboard power supply, 100 - 110V, 60 cycles
• Output voltage: 16V/500mA AC
• Power consumption: 2W
• Dimensions (lid open): 460 x 420 x 465mm
• Dimensions (lid closed): 460 x 160 x 365mm
• Weight: 10.5 kg / 11 kgs net

Pick it MC3 Phono Cartridge:

• Cartridge principle: moving coil (MC)
• Output voltage (1 kHz): 0.4mV (3.54cm/sec)
• Channel separation (1 kHz): 30dB
• Tracking ability (315Hz): 70μm
• Frequency response: 20Hz-20kHz (+/- 1dB)
• Stylus type: hyper-spherical
• Stylus tip radius: 5 x 250μm
• Tracking force range: 1.8-2.2g (18-22mN)
• Recommended tracking force: 2g (20mN)
• Tracking angle: 20°
• Recommended load resistance: 100-220Ω
• Break-in period: 30 hours
• Cartridge weight: 9.6g